Moving – Free parts

Home Forums Car Classifieds Moving – Free parts

This topic contains 1 reply, has 1 voice, and was last updated by meanvw meanvw 1 year, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #627
    meanvw
    meanvw
    Moderator

    Everything listed is free – picked up in Watertown.
    Best way to reach me is text or call : nine two zero five four five nine zero seven zero
    If you can use it, it’s yours- I do not have anything more than what is listed here.

    Mk5 – stock downpipe with cats and flex pipe- came off 2006 GLI at 20,000 miles
    MK1- five 4×100 13” steelies with tires- all tires hold air, but low tread, one rim has a bend
    MK1-Caddy corrugated metal section for rabbit pickup truck bed repairs. 3 ft wide x 4 ft long. Spot welds drilled out
    MK1- rabbit rear hatch glass with defroster lines and an older rubber seal-bad plastic/chrome trim
    Corrado – Black steering wheel clamshell- top and bottom
    Corrado – tilt steering wheel column with cruise control, wiper, signal, ignition and key. No steering wheel, just the column and accessories.
    Corrado- G60 automatic brake and gas pedal cluster with cruise servo
    Corrado – windshield wiper motor mechanism and one wiper arm
    MK1 – Ignition switch (no key) and turn signal and cruise control. Not sure if cruise was an option on MK1 or if this was aftermarket. No other parts for under hood, no other information.
    MK1 – factory sunroof cables and guides- fits rabbit with factory sunroof.
    MK1 – factory sunroof inner (headliner) panel covered in black fabric. No other sunroof parts available.
    MK1- 1.7 1.8 gasser 8v upper timing cover- surface rust, but could be perfect sandblasted/powder coated
    MK1 – diesel timing belt cover- sanded and rattle can painted blue. Good condition.
    Mk1 – seat rail covers- plastic- right and left
    Corrado – seat rail cover right side only-
    MK1- westy square headlight bucket with adjusters- no trim ring. 2 good sealed beam bulbs
    MK1- or others – Single DIN- single gauge blank- put this where a single din radio goes and add a gauge.
    MK1- stock diesel tolilet bowl downpipe head shield in good shape (no downpipe, just head shield)
    MK1- Driver side non-remote adjustable side view mirror- “Flag” type stock – black plastic with perfect glass
    MK5- Euro headlight switch with “coming home” pn 1k094143la- works, but wife’s fingernails damaged black “softtouch” finish. For fog lights
    Mk5 – PCV system bits – pn 06f103213h- no integral valve and06f103215a with integral valve (works) anf 06f103221f
    MK1- top, and 2 side (3 pieces) radiator plastic “buffer” for small radiator/non a/c car. Channels air over radiator for best cooling. Stock pieces
    Mk1- cabby remote mirrors- black- working- one missing the glass
    Mk3- Passenger lower bumper grill
    Mk5- front bumper stock amber side marker lights
    MK1- sunroof crank pn 00 556 818
    Mk3- 1 plastic center cap pn 191 601 140 – 6 ¼ inch
    Mk1- caddy rear bumper end caps- both sides- no centers
    Corrado – G60 instrument cluster with small MFD- also plastic bezel that goes in front of it. 140mph and 7K redline tach
    MK3- vr6 stock catalytic converter with o2 sensor- skid shield. Unknown mileage. 19.5” 3 bolt flange one side , 2” pipe other side
    Corrado – passenger headlight glass and bucket- broken adjusters
    MK1- Rabbit stock wide optional 4 door moldings – all 4- heat them up and put new 2 sided tape
    MK1- Caddy pickup rear bed corners (where you install the tail lights) – grey, no tail lights- just the corners- in good shape
    MK1- Caddy fuel door- grey – good shape
    MK2- center console with vinyl shift boot- black

    #631
    meanvw
    meanvw
    Moderator

    Many things gone- here’s what remains:
    MK1- two 4×100 13” steelies with tires- all tires hold air, but low tread
    MK1- rabbit rear hatch glass with defroster lines and an older rubber seal-bad plastic/chrome trim
    Corrado – tilt steering wheel column with cruise control, wiper, signal, ignition and key. No steering wheel, just the column and accessories.
    Corrado- G60 automatic brake and gas pedal cluster with cruise servo
    Corrado – windshield wiper motor mechanism and one wiper arm
    MK1 – Ignition switch (no key) and turn signal and cruise control. Not sure if cruise was an option on MK1 or if this was aftermarket. No other parts for under hood, no other information.
    MK1 – factory sunroof inner (headliner) panel covered in black fabric. No other sunroof parts available.
    MK1- 1.7 1.8 gasser 8v upper timing cover- surface rust, but could be perfect sandblasted/powder coated
    Mk1 – seat rail covers- plastic- right and left
    Corrado – seat rail cover right side only-
    MK1- westy square headlight 2 good sealed beam bulbs
    MK1- or others – Single DIN- single gauge blank- put this where a single din radio goes and add a gauge.
    MK1- stock diesel tolilet bowl downpipe head shield in good shape (no downpipe, just head shield)
    MK1- top, and 2 side (3 pieces) radiator plastic “buffer” for small radiator/non a/c car. Channels air over radiator for best cooling. Stock pieces
    Mk1- cabby remote mirrors- black- working- one missing the glass
    Mk3- Passenger lower bumper grill
    Mk5- front bumper stock amber side marker lights
    Mk3- 1 plastic center cap pn 191 601 140 – 6 ¼ inch
    Corrado – G60 instrument cluster with small MFD- also plastic bezel that goes in front of it. 140mph and 7K redline tach
    MK1- Rabbit stock wide optional 4 door moldings – all 4- heat them up and put new 2 sided tape
    MK1- Caddy fuel door- grey – good shape

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.